8
LOOSE PARTS
NOTE: Use this chart as a checklist to assure all parts have been received. Without these parts, total set-up cannot
be completed.
Note: Some parts may already be installed on machine.
Set Screw 1
Key 1 Install Handle Assembly
Roll Pin 1
Rear Wheel 2 Install Rear Wheels
Lug Nuts 8
Tine-5/8" 12 Install on Coring Head
Ignition Key 1
Frame Height Gauge 1
Timing Rods 4 Use to Time Coring Head
Operator's Manual 1 Read Before Operating Machine
Parts Catalog 1
Engine Manual 1
Registration Card 1 Fill Out And Return To Toro
Description
UseQty.
To Next Page
Loading...
