Toro Power Clear 418 User Manual

SPECIFICATIONS & MAINTENANCE
2-6
Toro Single Stage Snow Service Manual
Maintenance Service Interval Maintenance Procedure
After the rst hour
Check the control cable and adjust it if necessary.
Check for loose fasteners and tighten them if necessary.
After the rst 2 hours Change the engine oil.
Before each use or daily Check the engine oil level and add oil if necessary.
Yearly
Check the control cable and adjust it if necessary.
Inspect the rotor blades and replace the rotor blades and
scraper if necessary.
Change the engine oil.
Service the spark plug and replace it if necessary.
Check for loose fasteners and tighten them if necessary.
Inspect the drive belt and replace it if necessary.
Yearly or before storage Prepare the machine for storage.
Power Clear
®
418 (18 Inch Models)
Recommended Maintenance Schedule(s)
Maintenance
NOTE
Determine the left and right sides of the machine from the normal operating position.

Toro Power Clear 418 Specifications

General

Fuel Type	Gasoline
Engine	4-cycle
Clearing Width	18 inches
Throw Distance	25 feet
Clearing Depth	12 inches
Intake Height	12 inches
Chute Control	Manual
Drive System	Power Propel®