To Next PageTo Next Page
Need help?Do you have a question about the Toro Power Clear 621 QZE and is the answer not in the manual?
General| Start Type | Electric Start |
|---|---|
| Clearing Width | 21 in |
| Clearing Depth | 12 inches |
| Throwing Distance | Up to 35 ft |
| Weight | 84 lbs |
| Engine | 4-cycle |
| Warranty | 2-Year Full Coverage |
| Intake Height | 12 inches |
Procedure to unfold the handle by loosening knobs and securing locks for operation.
Procedure to install the discharge chute using screws for directing snow.
Procedure to fill the engine crankcase with the correct type and amount of oil before starting.
Instructions on how to adjust the control cable for proper operation and responsiveness.
Instructions on safely filling the fuel tank with the correct type of unleaded gasoline.
Procedure to check and add engine oil to the correct level before each operation.
Step-by-step guide to starting the snowthrower engine using the ignition key, choke, and primer.
Instructions on how to engage the snowthrower's rotor blades using the control bar.
Instructions on how to disengage the snowthrower's rotor blades by releasing the control bar.
Procedure for stopping the snowthrower's engine using the ignition key.
How to adjust the direction and angle of the snow discharge using the chute controls.
Procedure to safely clear a clogged snowthrower discharge chute using a clean-out tool.
Steps to prevent snowthrower parts from freezing after use in cold conditions.
Schedule outlining maintenance tasks based on service intervals like first hour, daily, and yearly.
Procedure to adjust the control cable for proper slack and operation.
Step-by-step guide for draining and refilling the engine oil for regular maintenance.
Procedure for inspecting rotor blades for wear using a wear indicator hole.
Instructions for checking and replacing the spark plug for optimal engine performance.
Guide to replacing a worn or damaged drive belt on the snowthrower.
Procedure to adjust the Quick Shoot control cables for proper chute rotation.
Details on the owner's responsibilities and rights concerning emission control system warranty.
Information on the warranty provided by The Toro Company for the engine and equipment.
Outlines the owner's duty to perform required maintenance and present the equipment for service.
Specifies the warranty coverage for emission-related parts and conditions.
Lists the specific parts covered under the emission control warranty.
Warranty ensuring the Toro GTS engine starts within two years if routine maintenance is performed.
Promise to repair the Toro Product if defective in materials or workmanship within the specified period.
Warranty terms for gas-powered Toro Products used for commercial, institutional, or rental purposes.
Steps to follow for arranging warranty service and contacting Toro for assistance.
Details the owner's obligation to maintain the product for warranty coverage.
Specifies general terms and conditions applicable to all warranty repairs.
Guidance for customers outside the US and Canada to obtain warranty information.
Information regarding the Australian Consumer Law as it applies to Toro products.
