Toro Power Clear 418 - Page 27

SPECIFICATIONS & MAINTENANCE
2-23
Toro Single Stage Snow Service Manual
Specications & Maintenance
2
4. Hold the discharge chute in the straightahead
position, pull the lower cable casing downward until
you remove the slack in the cable, and tighten the
screw on the lower cable clamp securely (Fig. 027).
5. Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely (Fig. 028).
NOTE
Do not overtension the cables. If the cables are
overtensioned, the Quick Shoot will be hard to operate.
A
Fig. 028
A
Fig. 027
A. Lower cable casing
A. Upper cable casing