Toro ProLine 30152 - Assembly; Loose Parts

3
Assembly
Loose Parts
Note: Use the chart below to identify parts used for assembly.
DESCRIPTION QTY. USE
Castor Wheel Assembly
Thrust Washer
Spacer
Retaining Ring
2
8
2
2
Install castor wheels to carrier frame
Carrier Frame
Flange Screw 1/2–13 x 1” (25 mm)
Flange Nut 1/2–13
1
6
6
Install carrier frame to traction unit
Adjusting Shaft
Jam Nut 1/2–13
Spacer 1/2” (13 mm)
Spring
Bushing
2
4
2
2
2
Install adjusting shafts
Clevis Pin
Hairpin Cotter
4
4
Install cutting unit to carrier frame
Operator’s Manual
Parts Catalog
1
1
Read before operating
Ordering parts