Toro TurfMaster HDX 22215 - Page 208

DoorandChuteAssemblyInstallation(continued)
2.Installthe2(1/4–10inch)taptitescrewssecuringthedoortothechute.
Torqueboltsto30±4in-lbs.(3.4±0.5Nm).
g299116
Figure333
3.Slidethedoorandchuteassemblyontothemachine.
4.Installthe4(1/4–20inch)boltssecuringthechuteanddoorassemblytothe
chassis.Torqueboltsto55±5in-lbs.(6±1Nm).
g299115
Figure334
5.Installthebeltcoverontothemachine.Installthe4(1/4–20inch)taptite
screwssecuringthebeltcovertotheframe.T orqueboltsto55±5in-lbs.
(6.2±0.5Nm).
Deck:ServiceandRepairs
Page7–82
30InchTurfMaster®HDXWPM
3432-730RevA