20
WWW.TORPMOTORS.COM
TORP DISPLAY.
INSTALLATION
First, remove the protective cap from the
connector by pressing firmly to its side
and pulling it out of the connector.
The Torp Display is being installed directly to the
controller`s wiring harness, as shown on the photo.
press pull out
Go to the App Store and update the Torp App to
the latest version
When the update is complete, go to the 5th
screen in the Torp App and press the UPDATE
FIRMWARE button. Once the update is complete,
re-calibrate the throttle and Hall Sensors.
You will need Firmware version 1.4 or higher in
order for the display to function. In case you are
using the 1.3 version of the Torp App, follow the
following steps:
1.
2.
Torp Display allows you to track your controller and battery data in real-time and to
switch between the riding modes. Additional options will be added through regular
firmware updates.
TORP DISPLAY AS A MODE BUTTON
To use the Torp Display as a MODE BUTTON, you should go to the Settings Screen in the
Torp App (4th screen) and tap on the MODE BUTTON option at the bottom of the screen.
There you should choose TORP DISPLAY as your mode button option.
To Next Page
Loading...