---------------------------------------------------------------------------------------------------------------------------------
- 11 -
Min. Value: 000
Max. Value: 127
Recommended Value:020
SCP1: SCART Prescaler when AVL is OFF (STEREO ONLY)
Min. Value: 000
Max. Value: 127
Recommended Value:013
FMP2: FM Prescaler when AVL is ON (STEREO ONLY)
Min. Value: 000
Max. Value: 127
Recommended Value:013
NIP2: FM Prescaler when AVL is ON (STEREO ONLY)
Min. Value: 000
Max. Value: 127
Recommended Value:016
SCP2: FM Prescaler when AVL is ON (STEREO ONLY)
Min. Value: 000
Max. Value: 127
Recommended Value:013
Tuner Settings:
In the following table, the parameters for tuner settings and the setting values of
Thomson CTF 5510 are given.
Parameter Explanation Thomson CTF5510
F1H High byte of VHF1-VHF3 cross-over frequency 0000 1001
F1L Low byte of VHF1-VHF3 cross-over frequency 1001 0010
F2H High byte of VHF3-UHF cross-over frequency 0001 1011
F2L Low byte of VHF3-UHF cross-over frequency 1000 0010
BS1 Band switching byte for VHF1 0000 0011
BS2 Band switching byte for VHF3 0000 0110
BS3 Band switching byte for UHF 1000 0101
CB Control byte 1000 1110