Need help?Do you have a question about the Toshiba 21S23D and is the answer not in the manual?
Safety and operational notices for service technicians.
Noticing special attention points indicated by labels or seals.
Warning against electric shock from high voltage parts.
Importance of using parts with specific safety characters.
Performing safety checks after repairs are completed.
Information required for ordering replacement parts.
Notes on handling silicon grease for ICs and transistors.
Details on CRT, color system, speaker, and sound output.
Information on broadcasting system, tuner, and frequency coverage.
Power source, consumption, and protective measures.
Procedure for safely removing the anode cap.
Procedure to check the total operating hours of the TV.
Steps for entering correct data into a new EEPROM IC.
General steps and tools required for electrical adjustments.
Core electrical calibration steps like voltage and VCO.
Adjusting focus, position, size, brightness, contrast, color, and tint.
Initial alignment of magnets for deflection yoke.
Centering colors using purity magnets.
Fine-tuning convergence using pole magnets.
Adjusting convergence for screen variations.
Guide showing wiring connections for adjustment points.
High-level functional blocks of the television system.
Component layout for the main and CRT boards (inserted parts).
Component layout for the stereo board (inserted parts).
Component layout for the stereo board (chip mounted parts).
Circuit diagram for the micon/tuner section on the main PCB.
Circuit diagram for the IF/Chroma section on the main PCB.
Circuit diagram for the 21-pin connector section on the main PCB.
Circuit diagram for the deflection and CRT section on the main PCB.
Circuit diagram for the power supply section on the main PCB.
Circuit diagram for the sound amplifier section on the main PCB.
Circuit diagram for the stereo processing board.
Oscilloscope readings for the micon/tuner section.
Oscilloscope readings for the IF/Chroma section.
Oscilloscope readings for deflection and CRT sections.
Oscilloscope readings for the 21-pin connector signals.
Oscilloscope readings for the stereo audio processing.
Oscilloscope readings for the sound amplifier section.
Visual representation of how the TV components fit together.
List of chassis, buttons, and external components.
List of various screws and fasteners used in assembly.
List of resistors with their values and types.
List of capacitors with their values and types.
To Next Page
General