---------------------------------------------------------------------------------------------------------------------------------
- 4 -
SCREEN ADJUSTMENT: (FBT Screen)
Enter service menu by pressing “MENU” and “4, 7, 2, 5” from remote controller. Then
press yellow button to disable vertical scan. Adjust screen via screen pot. For a thin
horizontal line. Press yellow button again to enable vertical scan. Press “TV” button to
leave service menu.
VLIN: Vertical Linearity
Enter a PAL B/G circle test pattern via RF. Change VLIN till you see circle as round as
possible.
Min. Value: 000
Max. Value: 063
Recommended Value:045
SCREEN
ADJ.POT.
To Next Page
Loading...
