Toshiba 21V53 - White Balance Adjustment; White Point Adjustment (WR, WG, WB); Bias for RED (BR)

---------------------------------------------------------------------------------------------------------------------------------
- 8 -
WHITE BALANCE ADJUSTMENT
The following three parameters are used to make white balance adjustment. To do this,
use a Colour Analyzer. Using WR (White point adjust for RED), WG (White point adjust
for GREEN), WB (White point adjust for BLUE) parameters, insert the + sign in the
square which is in the middle of the screen.
WR: White Point Adjustment for RED
Use this parameter to set the strength of RED in White.
Min. Value: 000
Max. Value: 063
JVC Default: 040
WG: White Point Adjustment for GREEN
Use this parameter to set the strength of GREEN in White.
Min. Value: 000
Max. Value: 063
JVC Default: 040
WB: White Point Adjustment for BLUE
Use this parameter to set the strength of BLUE in White.
Min. Value: 000
Max. Value: 063
JVC Default: 040
BR: Bias for RED
Use this parameter to set the strength of RED in BLACK.
Min. Value: 000
Max. Value: 063
JVC AV20&21BJ8: 030
JVC AV14BJ&BM8: 024