SetUngupyourTV 57
_ewing the system status
Settingthetimezone
The Time Zone setup allows you to specify the correcttime zone for
your region. This feature allows the TV status information to
display the correct time zone information for your viewing area.
To set the time zone:
1 Iri the Installation menu, highlight Time Zone, and press the
ENTER button.
2 Press the A/v(arrow) buttons to select the region, and then
press the ENTER button.
To set the Daylight Saving Time status:
1 In the Installation menu, highlight Daylight Saving Time, and
press the ENTER button.
2 Press the A/y(arrow) buttons to select On or Off, and then
press the ENTER button.
Viewingthesystemstatus
1 In the Get Help menu, highlight System Information, and
then press the ENTER button. The related information
appears.
To close the screen and return to the Get Help menu:
o_o Highlight Done in the Support Information screen, and then
press the ENTER button.
To return to normal viewing, press the EXIT button.
ResettingFactoryDefaults
To reset all settings and channels to their factory default values:
1 Press the MENU button and open the Installation menu.
2 Highlight Reset TV, and then press the ENTER button.
3 Enter your PIN code (Ifa PIN code has been set).
4 A confirmation screen appears. Select Yes,and press the ENTER
button. The TV will turn offautomatically.
To cancel the reset process, select No, and press the ENTER button.
To Next Page
Loading...
Need help?
General