3. Press _ or _" to display the VoCHIP menu.
4. Use the Channel Number buttons (0=9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four=digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
Note:
ff you foJtget your PIN code, press RECALL
four times within five seconds from the WCH/P
menu. This allows you to proceed to the
BLOCKING menu and resets your PiN code.
i_i_i!i_ii!:!:!:!i!i!:!:!:!i!i!:!:!:!i!i!:!:!:!i!i!i_iiiiiiiiiiYiiiiYiiiiYiiiiYiiiiYi_
SET RATING START _"
BLOCKING OPTION START
NEW PIN CODE START _
5. You may now enable blocking. See "Blocking programs by ratings"
(below), 'Locking channels" (page 22), "To change your PIN code"
(below), or 'Blocking unrated movies or programs" (page 22).
To change your PIN code:
1. Press MENU, then press 4 or _ to display the OPTION menu.
2. Press ,& or V to highlight \!oCHtP.
3. Press _1 or _- to display the V-CHIP menu.
4. Use the Channel Number buttons (0=9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press _, or Y to highlight NEW PIN CODE and press 4 or [_ to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0=9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the \!-Chip feature
and allow you to block programs according to the rating limits you set.
!iili_
Channel
Numbers
Menu/
Enter
Recall
Exit
19
To Next Page
Loading...
