Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV's speakers. The
feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode, if available (see "Selecting stereo/SAP
broadcasts" on page 29.)
2. Press MENU, and then press 4 or @ until theAUDIO menu
appears.
3. Press A or V to highlight SURROUND.
4. Press 4 or _ to highlight ON.
To turn off the surround sound feature:
Highlight OFF in step 4 above.
In general, you can leave your TV in surround mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).
Menu
®
Using the StableSound feature
The StableSound feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the Stab[eSound C_feature:
1. Press MENU, then press _ or _ until theAUDIO menu appears.
2. Press A or V to highlight STABLE SOUND.
3. Press 4 or _ to highlight ON.
I
BASS 82 |
TREBLE m=====i===== 32
!
I
BALANCE 0
BBE OFF I
SURROUND OFF I
OFF
SELECT _ V ADJUST _ _
To turn off the StableSound _feature:
Highlight OFF in step 3 above,
Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its
broadcast for the day and stops broadcasting on that channel. This feature does not work in VIDEO mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV
on automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord
from the wal! outlet to prevent the TV from turning on in your absence.
31
To Next Page
Loading...
