÷
÷
Setting the dock
You must set the clock before you can program the ON/OFF timer.
To set the clock: (E×ampme: 8:30 AM)
1. Press MENU, then press 4 or l_ to display the OPTION menu.
2. Press A or V to highlight ON/OFF TIMER.
LANGUAGE ENGLISH
CH LABEL START
FAVORITECH START _"
V-CHIP START
LOCK START
_DOvN D OFF _i
SELECT _ _ ADJUST _
SET ENTER
3. Press _ or _ to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press _ or V to highlight CLOCK, then press 4 or _ to highlight
the hour position.
ONTIMER
12:00 AM CH 001
CLEAR
OFFTIMER
12:00AM
CLEAR
SELECT _ _* ADJUST _. V
END EXIT
5. Press A or V to set the hour, then press _ to highlight the minute
)osition.
0:_f_ AM
12:00 AM CH 001
CLEAR
OFFTIMER
12:00AM
CLEAR
SELECT _ _ ADJUST ,& Y
END EXIT
6. Press A or V to set the minutes, then press EXiT to return to
normal viewing.
Setting the ON/OFF timer
Setting the on timer
This feature allows you to program the TV to turn on automatically at a
set time. if you program the ON TIMER to "DAILY," the TV wilI turn on
every day at the same time to the same channel until you clear the ON
TIMER.
To set the on timer: (Exampme: Turning on the TV to channem 12 at
7:00 AM, DAILY)
1. Press MENU, then press 4 or _ to display the OPTION menu.
2. Press A. or V to highlight ON/OFF TIMER.
3. Press 4 or b,"to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press A or V to highlight ON TIMER and press 4 or _ to highlight
the hour position.
CLOCK 12:00 AM
_AM CH 001
CLEAR
OFFTIMER
12:00AM
CLEAR
SELECT _ _ ADJUST ,& Y
END EXIT
25
-AT4_
/__1
x
- Menu/
Enter
-- Exit
Note:
If the power source for the TV is interrupted
(for example, the power cord is unplugged or
a power failure occurs), you w:ittneed to reset
the clock.
AV4_
Menu/
Enter
Exit
Note:
After a power failure or disconnection of the
powe8 the timer settings will be lost.
÷
3N42601A[E] P17-28
25
÷
1/24/04, 3:37 PM
To Next Page
Loading...
