Toshiba 27AF62 - Using the TVs Features; Channel Blocking and Unblocking

Using the TV’s
Features
24
Note:
After programming CHANNEL BLOCK, tune
the TV to a channel that is not blocked, before
turning the TV off.
Caution:
Blocking unrated television programs (those
rated “TV NONE”) may block on-screen
emergency messages.
8. Press y or z to highlight SET BLOCKING OPTIONS.
9. Press
x or • to display the unrated movie/program blocking menu.
10. Press
y or z to highlight BLOCK MPAA UNRATED or BLOCK
TV NONE RATING.
11. Press
x or • to highlight “Y” to block unrated movies/programs.
(Note: Highlight “N” to unblock unrated programs.)
12. Press EXIT to return to normal TV viewing.
MOVE
[ ]
[ ]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK OFF
SET UP
SELECT
MOVE
[ ]
[ ]
BLOCK MPAA UNRATED: [Y] N
BLOCK TV NONE RATING: [Y] N
BACK TO V-CHIP MENU
SET UP
SELECT
NOTICE: ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
Blocking channels
You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed, regardless of their
ratings. If you try to tune the TV to a blocked channel, the nearest
unblocked channel will display.
To block a channel:
1. Tune the TV to the channel you want to block.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight V-CHIP CONTROL.
5. Press
x or • to display the PIN code entering screen.
6. Use the CHANNEL NUMBERS (0–9) to enter your PIN code.
After entering the code, the V-Chip Control menu appears.
7. Press
y or z to highlight BLOCK CHANNEL.
8. Press
x or • to display the BLOCK CHANNEL menu.
9. Press
x or • to select SET.
10. Press
z to add the current channel to the list.
SELECT
[ ] [ ]
BLOCK CHANNEL
[SET]
CLEAR
000 6
SET UP
SET
END [EXIT]
11. Press EXIT.
12. Repeat steps 1–11 to block additional channels.
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the PIN code entering screen.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL
POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
CH
VOL
EXIT