Toshiba 32A3000P - OP8 Picture Mode

OP8
LED Indication
The Green and Red LEDs on the TV (at the bottom center of the TV) indicate the TV's
status, as described below.

Red ON (solid) and Green OFF = The TV power cord is plugged in.

Green ON (solid) and Red ON = The On timer is operating.
D0 (bit0) Value above 100 is no effect.
OPT8 FUNCTION DESCRIPTION 1 0 (Normal)
D7 (bit7) ~
D3 (bit3)
- (no use) - -
D2 (bit2) Enable mode that picture mode will be set in
forced when turn ON the main power
Enable
(Display the
language only)
Disable
D1 (bit1) ~
D0 (bit0)
Forced picture mode 0 [dec]: Dynamic (mode-1)
(Normal)
1 [dec]: Standard (mode-2)
2 [dec]: Mild (mode-3)
3 [dec]: Memory (mode-M)
LED Indication Condition Solution
1 Green is OFF;
Red blinks continuously at 0.5-
second intervals.
Abnormal operation Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
2 Green is OFF;
Red blinks continuously at 1-
second intervals.
Abnormal operation of
BUS line.
Turn OFF the TV and unplug
the power cord.
Plug the power cord in again
and turn ON the TV.
Стр
.
20
из
21
ADJUSTMENT [LCD Color Television] ASIA_EU
21.04.2015
file://D:\Documents and Settings\Admin\
Рабочий стол
\
toshiba_32a3000p
-
01\32A300
...