FUNCTION AND OPERATION
Manual Tune
The television can be tuned-in manually using
Manual tuning
. For example: if the television
cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station
on another
System
.
Use
left
and
right
to move across the screen and select any of these Manual Tune options.
To allocate a programme position on the television for a decoder and media recorder: turn the
decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually
tune.
Programme : The number to be pressed on the remote control.
System : Specific to certain areas.
Colour system : Factory set to Auto, should only be changed if problems are
experienced, i.e. NTSC input from external source.
Programme skip :
means nothing has been stored or the facility to skip
the channel is ON.
Channel : The channel number on which a station is being broadcast.
Search : Search up and down for a signal.
Manual fine tuning : Only used if interference/weak signal is experienced.
Station : Station identification. Use up or down and left or right to enter
up to seven characters.
file://D:\Documents and Settings\Admin\
To Next Page
Loading...
