Need help?Do you have a question about the Toshiba 32AF45C and is the answer not in the manual?
General| Display Technology | CRT |
|---|---|
| Screen Size | 32 inches |
| Aspect Ratio | 4:3 |
| Comb Filter | 3D Y/C Digital |
| Speakers | Stereo |
| Inputs | Composite, S-Video, Component |
Guidelines for paying attention to safety labels and notices.
Warning about high voltage parts and avoiding electric shock.
Importance of using specified parts for safety and performance.
Instructions to return parts and wires to original positions after servicing.
Precautions for safely handling the cathode-ray tube.
Safety advice regarding X-ray emissions from the high voltage circuit.
Procedures for post-repair safety checks, including insulation resistance.
Warnings and advice on handling lead-free solder, including melting point.
Step-by-step guide for safely removing and installing the CRT anode cap.
Procedures for desoldering and removing flat package ICs from the circuit board.
Steps for soldering and installing flat package ICs onto the circuit board.
Overview of available service modes for repair, examination, and adjustment.
Procedure to check the unit's total power-on hours displayed on screen.
Steps for setting correct data when replacing the EEPROM IC.
General instructions and precautions for performing electrical adjustments.
Initial steps for static convergence using magnets.
Adjusting purity magnets for correct color purity on screen.
Fine-tuning static convergence using pole magnets.
Adjusting dynamic convergence using deflection yoke and wedges.
To Next Page
