17
Chapter 2: Connecting your TV
REGZA-LINK
®
connection
You can control the basic functions of connected audio/video devices using the TV’s remote control if you
connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and
operations, see pages 48-50.
TV back panel
Audio receiver
Playback device
(REGZA-LINK DVD player,etc.)
Playback device
(REGZA-LINK DVD player,etc.)
To connect an Audio Receiver and Playback
Devices, you will need:
•
HDMI cables ( page 13)
Note:
•
If several devices are connected, REGZA-LINK
feature may not operate properly.
•
For proper operation, it is recommended that you
use HDMI cables with the HDMI Logo
( ).
Before controlling the device(s):
•
After completing the above connections, set the
REGZA-LINK Setup menu as you desire ( page
49).
•
The connected devices must also be set. For
details, see the operation manual for each device.
•
The REGZA-LINK feature uses the CEC
technology as regulated by the HDMI standard.
•
This feature is limited to models incorporating
Toshiba’s REGZA-LINK. However, Toshiba is not
liable for those operations. Refer to the individual
instruction manuals for compatibility information.
Note: This feature may not work properly
depending on the devices that are connected.
32C100U2_EN-A5.indb 17 2010/3/10 下午 01:44:02
To Next Page
Loading...
