English - 35 -
English
Application Version
Displays the current application version.
Hard of Hearing
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
Use • Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off.
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describing what is happening on the screen during the
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary). You can use this
feature, only if the broadcaster supports that additional
narration track.
Highlight • Audio Description by pressing Up or
Down button.
Press • OK button to enter Audio Description
submenu.
Use • Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
Auto TV Off
You can set the timeout value of auto off feature.
After the timeout value is reached and the TV is not
operated for selected time, the TV will go off. Press
MENU button and select Settings by using Left or
Right button. Press OK button to continue. Use Up
or Down button to select Other Settings and then
press OK button. Select Auto TV Off using Up or
Down button.
Note: If the TV switches off while in No Signal mode,
the following on-screen message will be displayed on
the next switch-on:
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
Full Mode (optional)
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080p resolutions, Full Mode item will
be visible.
Teletext language
Use this setting to set a preferred Teletext language.
Press MENU button and select Settings by using Left
or Right button. Press OK button to continue. Use Up
or Down button to select Language and then press
OK button. Select Teletext language using Up or
Down button and use Left or Right button to set.
HDMI True Black
While watching from HDMI source, this feature will be
visible in the Picture Settings menu.
You can use this feature to enhance blackness in the
picture. You can set this feature as “On” for activating
HDMI True Black mode. Press MENU button and
select Picture by using Left or Right button. Press OK
button to continue. Select HDMI True Black using Up
or Down button and use Left or Right button to set.
Note: HDMI True Black On/Off feature functions only
when the HDMI device output is set to RGB.
Other Controls
00_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(32145LED_1910UK)_NICKEL17_10075896_10076140.indd 3500_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(32145LED_1910UK)_NICKEL17_10075896_10076140.indd 35 26.11.2011 11:45:0226.11.2011 11:45:02
To Next Page
Loading...
