Toshiba 32HL86 - Page 27

6. CMOS-LSI circuitry is used in the LCD module, so avoid damage due to static
electricity. When handling the module, use a wrist ground or anchor ground.
7. Do not expose the LCD module to direct sunlight or strong ultraviolet rays for an
extended period of time.
8. Do not store the LCD module below the temperature conditions described in the
specifications. Failure to do so could result in freezing of the liquid crystal due to cold
air or loss of resilience or other damage.
9. Do not disassemble the LCD module. Such actions could result in improper operation.
Page
3
of
4
Handling the LCD Module
14.02.2017
file://C:\Documents and Settings\Admin\Local Settings\Temp\Rar$EXa0.590\TOSHI
...