Why do the control buttons on my Toshiba 32L110U not work?
If the control buttons on your Toshiba TV do not work, make sure that the Panel Lock option is set to Off. Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
Why does my Toshiba 32L110U TV have a good picture but no sound?
If your Toshiba TV has a good picture but no sound, check these items: First, increase the volume and ensure the sound isn't muted. Make sure headphones are not connected, as this will disable the TV speakers. If using a home theater system, sound bar, or external speakers, ensure they are powered on, not muted, and the correct output mode is selected. If connected with a digital optical cable, go to the Sound menu, highlight Digital Audio Format, then press ENTER. Highlight Audio Format, then press ENTER. Press S or T to select PCM, then press ENTER. Also, verify that the audio cables and antenna/cable TV are connected correctly and securely. Finally, the audio cables you are using may be faulty, so try a new set.
How to fix a Toshiba TV remote control that is not working?
If your Toshiba TV remote control isn't working, try these steps: First, ensure the TV's power cord is plugged into a working outlet. Make sure there are no obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor on the TV. Ensure you've removed any plastic wrapping from the batteries. Verify the batteries are installed correctly. Finally, replace the batteries with new ones.
What to do if my Toshiba 32L110U TV displays a 'No signal' error message?
If your Toshiba TV displays a 'No signal' error message, press the INPUT button and ensure you've selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use the remote that came with that box to change channels.
How do I remove a retail banner displayed on my Toshiba 32L110U?
If a retail banner is displayed on your Toshiba TV, you selected Store Mode when you ran the Initial Setup wizard. Go to the Installation menu, highlight Store / Home Mode, then press W or X to select Home, then press ENTER.
Why doesn't the device show up in the list of CEC devices on my Toshiba 32L110U TV?
If the device does not show up in the list of CEC devices on your Toshiba TV, make sure that the device is turned on, the HDMI cable is connected securely to your TV and the device, the device is connected to your TV with an HDMI cable, the HDMI-CEC Control feature is turned on, and the device is a CEC device.
How to eliminate audio noise from my Toshiba 32L110U?
To eliminate audio noise from your Toshiba TV, other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
Why can't I select my device when I press INPUT on my Toshiba 32L110U?
If you cannot select your device when you press INPUT on your Toshiba TV (it is grayed out), make sure that the video input source for the device is not hidden.
Why is there a dark or poor picture on my Toshiba 32L110U, but the sound is good?
If your Toshiba TV has a dark, poor, or no picture but the sound is good, try the following: First, try another channel, as the station may be experiencing problems. Ensure that the antenna or cable TV is connected correctly and securely. Adjust the brightness settings. Press PIC SIZE to change the aspect ratio. If you're using an antenna and the signal strength is low, adjust it or use a more powerful antenna with an amplifier. Make sure the video cables are securely connected. Also, the video cables you are using may be faulty, so try a new set.
Why are there no channels after auto channel search on my Toshiba TV?
If there are no channels after an Auto Channel Search on your Toshiba TV, reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. Make sure that the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
Guidelines for safe TV placement, mounting, and handling to prevent injury.
Key warnings about electric shock, moisture, lightning, power lines, and mobile phones.
Step-by-step guide for attaching the stand to the 28-inch TV model.
Important warning about securely attaching the bracket using all four VESA holes.
Table identifying connection types and corresponding cable connectors for best video quality.
Instructions to enable or disable HDMI CEC control for connected devices.
Troubleshooting steps for issues like dark picture, poor color, snow, or double images.
Explanation of warranty terms, coverage period, and definitions of key terms.
To Next Page
General
