Toshiba 32L110U - User Manual

Other manuals for Toshiba 32L110U

Questions and Answers:

W
William JohnsonSep 1, 2025
Why are there no channels after auto channel search on my Toshiba TV?
- J
  Jennifer CurtisSep 1, 2025
  If there are no channels after an Auto Channel Search on your Toshiba TV, reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. Make sure that the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
J
Joseph WardAug 31, 2025
Why is there no output from one of the speakers on my Toshiba 32L110U?
- J
  Jacob ParkAug 31, 2025
  If there's no output from one of the speakers on your Toshiba TV, adjust the audio balance settings. Also, ensure that the audio cables are connected correctly and securely to your TV.
P
Patrick Monroe IIIAug 30, 2025
Why doesn't my Toshiba 32L110U turn on when I turn on my device?
- D
  Desiree MillerAug 30, 2025
  If your Toshiba TV doesn't turn on when you turn on your device, make sure the HDMI-CEC Control feature is turned on and that TV Auto Power On is set to On. The device may not support this feature.
R
rharveyAug 29, 2025
How to troubleshoot a Toshiba 32L110U that has no power?
- S
  spencermillerAug 29, 2025
  If your Toshiba TV has no power, ensure the power cord is plugged into a working outlet. If it is, unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV. Other devices, such as a surround sound receiver, external speakers, fans, or hair dryers, may be interfering with your TV. Try turning off one device at a time, then turning on your TV to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
A
andersonmarioAug 28, 2025
Why are some channels not displaying on my Toshiba 32L110U?
- V
  Veronica JordanAug 28, 2025
  If one or more channels are not displaying on your Toshiba TV, make sure the channels are not blocked or hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. If you are using a cable or satellite box, use the remote that came with that box to change channels. Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use.
W
William BarnesAug 27, 2025
How to make the picture fill the screen on my Toshiba 32L110U?
- J
  John HancockAug 27, 2025
  To adjust the picture size on your Toshiba TV so that it fills the screen, press the PIC SIZE button to change the aspect ratio.
A
Ashley ChenAug 27, 2025
What to do if my Toshiba 32L110U TV displays a 'No signal' error message?
- A
  Alyssa MoralesAug 27, 2025
  If your Toshiba TV displays a 'No signal' error message, press the INPUT button and ensure you've selected the correct input for the device or service you are trying to use. If you are using a cable or satellite box, use the remote that came with that box to change channels.
J
Jason StevensAug 25, 2025
How to fix a Toshiba TV remote control that is not working?
- R
  roweamyAug 26, 2025
  If your Toshiba TV remote control isn't working, try these steps: First, ensure the TV's power cord is plugged into a working outlet. Make sure there are no obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor on the TV. Ensure you've removed any plastic wrapping from the batteries. Verify the batteries are installed correctly. Finally, replace the batteries with new ones.
W
wilsonrobertAug 25, 2025
Why does my Toshiba 32L110U TV have a good picture but no sound?
- R
  robertfrederickAug 25, 2025
  If your Toshiba TV has a good picture but no sound, check these items: First, increase the volume and ensure the sound isn't muted. Make sure headphones are not connected, as this will disable the TV speakers. If using a home theater system, sound bar, or external speakers, ensure they are powered on, not muted, and the correct output mode is selected. If connected with a digital optical cable, go to the Sound menu, highlight Digital Audio Format, then press ENTER. Highlight Audio Format, then press ENTER. Press S or T to select PCM, then press ENTER. Also, verify that the audio cables and antenna/cable TV are connected correctly and securely. Finally, the audio cables you are using may be faulty, so try a new set.