61
28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV
www.tv.toshiba.com
3 Highlight Channel Tuning, then press ENTER.
4 Highlight Auto Tuning, then press ENTER.
5 Use the number buttons to enter your 4-digit PIN,
then press ENTER twice. If you have not created a
PIN, see Setting a new PIN on page 63. Your TV
scans for available channels. The scan may take
several minutes.
6 When the scan is complete, press EXIT to close the
menu. Your TV tunes to the first scanned channel.
Manually adding channels to the channel list
Channels with weak signals may not be added to the
channel list when you scan for channels. You can
manually add a channel to the channel list if you
know the channel number.
1 Press MENU, press
S or T to highlight
Installation, then press ENTER.
2 Highlight Channel Tuning, then press ENTER.
3 Highlight Manual Tuning, then press ENTER.
4 Use the number buttons on the remote control to
enter the channel number, then press ENTER.
5 Press ENTER to start manual tuning.
6 Press EXIT to close the menu.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
To Next Page
Loading...
