68
Toshiba 28"/32" 720p 60Hz LED TV
www.tv.toshiba.com
4 Use the number buttons to enter your 4-digit PIN,
then press ENTER. A check appears in the locked
column next to the channel.
5 Press EXIT to close the menu.
Setting the GameTimer™
You can use the GameTimer™ to set a time limit for
playing a video game (30–120 minutes). When the
GameTimer expires, your TV locks out the input
source for the video game device.
1 Press MENU, press
S or T to highlight Timers,
then press ENTER.
2 Highlight Game Timer, then press ENTER.
3 Use the number buttons to enter your 4-digit PIN,
then press ENTER.
4 Highlight the amount of time you want to let the
game run before it turns off, then press ENTER.
You can select Off, 30 min, 60 min, 90 min, or
120 min.
5 Press EXIT to close the menu.
Locking control buttons on your TV
You can lock the buttons on the side of your TV to
keep someone from changing your settings or
changing channels. When Panel Lock is set to On,
none of the buttons on your TV work except the
POWER button.
You still use the remote control to control your TV.
1 Press MENU, press
S or T to highlight Options,
then press ENTER.
2 Highlight Panel Lock, then press ENTER.
Note
To unlock a channel, highlight the
channel, then press ENTER to remove the
check.
Note
To turn off the game timer, select Off.
Notes
• A message appears when 10 minutes, 3
minutes, and 1 minute are remaining.
• If your TV loses power with time remaining,
your TV enters input lock mode when power
is restored (as if the GameTimer had been
activated). To resume use, you must
deactivate the input lock. See Locking video
inputs on page 67.
To Next Page
Loading...
