Toshiba 32L110U - Installing a Wall-Mount Bracket (32-Inch)

12
Toshiba 28"/32" 720p 60Hz LED TV
www.tv.toshiba.com
Installing a wall-mount bracket (32-inch)
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
2 If the stand is installed, remove the two screws that secure the stand leg to your TV, then remove the stand.
Warning
• Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV, the bracket must be
securely attached, using all four holes. If you do not use all four
mounting holes, your TV may fall and cause property damage or
personal injury. See the documentation that came with your wall mount
for complete mounting instructions.
• This TV is intended to be supported by a UL Listed wall mount bracket
with suitable weight/load. (See Miscellaneous on page 82.)