The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“hazardous voltage” within the product’s enclosure, which may be of
sufficient magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FIND YOUR USER GUIDE ONLINE!
Go to www.tv.toshiba.com and follow the
online instructions.
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain
or moisture.
Note: The component and AV
jacks are shared. This means you
can connect only one component
or AV device at a time. We suggest
upgrading to HDMI (BEST) if your
device supports it.
COMPONENT
BETTER
Note: Connect the
yellow video cable
to the green
Y/VIDEO jack.
IMPORTANT: See the online User Guide before
installing the TV on a wall.
URL: www.tv.toshiba.com
Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the
back of your TV, the bracket must be securely attached, using all four holes. If you do not
use all four mounting holes, your TV may fall and cause property damage or personal injury.
See the documentation that came with your wall mount for complete mounting instructions.
Sample illustration
Sample
illustration
ANT /
AV IN
CABLE IN
COMPONENT IN
Quick Setup Guide | 28L110U/32L110U
28" 720p, 60Hz, LED TV
32" 720p, 60Hz, LED TV
START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need: Soft surface and a Phillips screwdriver.
WALL MOUNT
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need : Soft surface
Before you mount your TV, make sure that:
• You remove the stand.
• The wall-mount bracket is listed by an independent laboratory (such as UL, CSA, or ETL).
• The bracket supports the weight of your TV.
A Carefully place your TV face-down on a cushioned, clean surface.
B See the instructions that came with your wall mount for
more information about how to correctly mount your TV.
A Carefully place your TV face-down on a cushioned, clean surface.
B Secure each TV stand to the back of your TV with two of the provided
M4 × 20 mm screws.
A Carefully place your TV face-down on a cushioned, clean surface.
B Secure the TV stand leg to the back of your TV with the
two provided M5 × 12 mm screws (the long screws).
C Insert the stand leg into the hole in the stand. Make sure that the post
on the TV stand fits into the hole on the leg.
D
Secure the leg to the stand with the four provided M4 × 8 mm screws (the short screws).
HDMI (BEST)
Best video quality
1
Left side
Front
Back
INCLUDED ACCESSORIES
Stand leg
TV stand
TV stands
M4 screws
(8 mm length)
(4 pcs.)
M5 screws
(12 mm length)
(2 pcs.)
OR
A
A
B
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?
FEATURES
2
OR
Coaxial
(GOOD)
AV (GOOD)
VESA Mounting Pattern
VESA mount (mm): 200 × 200 - M6 Type screws
VESA Mounting Pattern
VESA mount (mm): 100 × 100 - M4 Type screws
A
M4 screws
(20 mm length)
(4 pcs.)
Remote control and
two AAA batteries
AAA
+
AAA
+
C
M4 type (8 mm) screws
D
AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
ANT /
CABLE IN
AV IN
COMPONENT IN
B
×2
M5 type (12 mm)
screws
ANT /
CABLE IN
AV IN
COMPONENT IN
Power On/Standby LED
Remote sensor
Power cord
M4 type (20 mm) screws
A
B
32"
28"
32"
28"
32"
28"
ANT /
AV IN
To Next Page
Need help?
General
