START HERE
How do I attach the stand to my TV? (not for wall mounting)
You’ll need : Soft surface and a Phillips screwdriver.
A Carefully place your TV face-down on a cushioned, clean surface.
B Secure each TV stand leg to the back of your TV with two of the provided screws.
1
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
“hazardous voltage” within the product’s enclosure, which may be
of sufficient magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
FIND YOUR USER GUIDE ONLINE!
Go to www.tv.toshiba.com and follow the
online instructions.
IMPORTANT: See the online User Guide before installing the
TV on a wall.
URL: www.tv.toshiba.com
Quick Setup Guide | 32L310U18/55L510U18
32" 720p, 60Hz, LED TV
55" 1080p, 60Hz, LED TV
Remote control and
two AAA batteries
M5 screws
(15 mm length)
(4 pcs.)
ST4 screws
(25 mm length)
(4 pcs.)
Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the back of your TV, the bracket must
be securely attached, using all four holes. If you do not use all four mounting holes, your TV may fall and cause property
damage or personal injury. See the documentation that came with your wall mount for complete mounting instructions.
WALL MOUNT
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: Soft surface and a Phillips screwdriver.
Before you mount your TV, make sure that:
• You remove the stand legs.
• The wall-mount bracket is listed by an independent laboratory (such as UL, CSA, or ETL).
• The bracket supports the weight of your TV.
A Carefully place your TV face-down on a cushioned, clean surface.
B
See the instructions that came with your wall mount for more information about how to
correctly mount your TV.
32"
55"
A
B
INCLUDED ACCESSORIES
(Sample Illustration)
32”model
32" 55"
(Sample Illustration)
55”model
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game console?
Features
Front
2
AAA
+
AAA
+
Coaxial
(GOOD)
AV (GOOD)
32" 55"
Stand legs
32"
AUDIO/VIDEO OUT
HDMI® (BEST)
Best video quality
To Next Page
Need help?
General
