Remote Control active area:
2. Press the pass code to activate the factory mode
3. Press to activate the Channel Lock (enter PIN code for Channel
lock)
4. If channel list OSD active - jump to that channel in the channel list
AD: N/A
ATV/DTV: N/A
VOL +/ –: Press to adjust the volume
I+/ INDEX: info display / TTX index
MUTE: Press to Interrupt the sound or restore it.
OPTION: Go to shortcut menu
P / :
1. Press to browse channels
2. The channel number should appear on the set
GUIDE: N/A
EXIT: Press to Exit OSD
Cursor Key: 1. Press cursor up/button to navigate OSD menu item
2. Cursor right key perform confirmation as well as proceed next level
of OSD
3. Can use cursor left to return previous level
MENU: Press to activate OSD menu and back to previous level of OSD
RETURN: Press to return previous level
OK Key: OK
Red Key: TTX Red button
Green Key: TTX Green button
Yellow Key: TTX Yellow button
Cyan: TTX Cyan button
REVEAL: TTX Reveal button
HOLD: TTX Hold button
FULL-TOP-BOTTOM: TTX zoom
TIME / TXCL: Time display / TTX cancel
Angle Distance
0 º (for H & V) ≥ 5 m
30 º (for H & V) ≥ 5 m
To Next Page
Loading...
