Toshiba 32W3663DA - Remote Control (Depending on the Model)

English - 9 -
Remote Control (Depending on the model)
1. Standby: Switches On / Off the TV
2. Numeric buttons: Switches the channel, enters a
number or a letter in the text box on the screen.
3. Favourites: Displays favourite lists menu / Switches
between favourite lists
4. Mute: Completely turns off the volume of the TV
5. Volume +/-
6. Menu: Displays TV menu
7. Navigation buttons: Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right or Left
8. OK: Conrms user selections, holds the page (in TXT
mode), views channel list (DTV mode)
9. Back/Return: Returns to previous screen, opens index
page (in TXT mode)
10. Media browser: Opens the media browsing screen
11. Quick Menu: Displays a list of menus for quick access
12. My button 1 (*)
13. Coloured Buttons: Follow the on-screen instructions
for coloured button functions
14. Language: Switches between sound modes (analogue
TV), displays and changes audio/subtitle language
(digital TV, where available)
15. Rapid reverse: Moves frames backwards in media
such as movies
32. No function
16. Pause: Pauses the media being played
17. Play: Starts to play selected media
18. Subtitles: Turns subtitles on and off (where available)
19. Stop: Stops the media being played
20. Rapid advance: Moves frames forward in media such
as movies
21. Screen: Changes the aspect ratio of the screen
22. My button 2 (*)
23. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
24. EPG (Electronic programme guide): Displays the
electronic programme guide
25. Exit: Closes and exits from displayed menus or returns
to previous screen
26. No function
27. Info: Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
28. Programme +/-
29. Swap: Quickly cycles between previous and current
channels or sources
30. Source: Shows all available broadcast and content
sources
(*) MY BUTTON 1 & MY BUTTON 2:
These buttons may have default functions depending on
the model. However you can set a special function to these
buttons by pressing on them for ve seconds when on a
desired source or channel. A conrmation message will be
displayed on the screen. Now the selected MY BUTTON is
associated with the selected function.
Note that if you perform First Time Installation, MY BUTTON
1&2 will return to their default function.