Toshiba 36A43 - Changing Your PIN Code; If You Forget Your PIN Code

20
Using the TV’s
Features
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After the code is entered, the V-Chip Control menu
appears.
MOVE
[ ]
[ ]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET UP
SELECT
V-Chip Control (Blocking) Menu
6. Press y or z to highlight ENABLE BLOCKING.
7. Press
x or • to highlight “Y,” which enables all blocking by activat-
ing the V-Chip. See “Blocking programs by ratings” on page 21,
“Blocking unrated movies and programs” on page 23.
Note: The “Blocking channels” feature (page 24) is not affected by the
ENABLE BLOCKING setting.
To disable blocking:
Highlight “N” in step 7, above, to deactivate the V-Chip Control
feature and disable blocking.
Changing your PIN code
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the PIN code entering screen.
5. Use the Channel Number buttons (0–9) to enter your existing PIN
code. After the code is entered, the V-Chip Control menu appears.
6. Press
y or z to highlight NEW PIN CODE.
7. Press
x or • to display the New PIN Code entering screen.
MOVE
[ ]
[ ]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET UP
SELECT
SELECT [0–9] END [EXIT]
PLEASE ENTER NEW PIN CODE
_ _ _ _
SET UP
8. Use the CHANNEL NUMBERS (0–9) to enter a new PIN code.
After the new code is entered, the V-Chip Control menu appears.
9. Press EXIT to return to normal TV viewing.
If you forget your PIN code
1. Press MENU.
2. Press
x or • to highlight the SET
UP menu.
3. Press
y or z to highlight V-CHIP
CONTROL.
4. Press
x or • to display the PIN
code entering screen.
5. While the PIN code entering
screen is displayed, press RECALL
four times within five seconds. The
“Blocking Is Reset” screen appears.
SELECT [0–9] END [EXIT]
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
_ _ _ _
SET UP
6. Use the CHANNEL NUMBERS
(0–9) to enter a new PIN code.
After the new code is entered, the
V-Chip Control menu appears.
7. Press EXIT to return to normal TV
viewing.
Channel
Numbers
RECALL
}
EXIT
}
stT S
MENU