– 14 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
Vertical
WIDE mode
Vertical amplitude [HIT]
Vertical position [VPS1]
Super-live mode
Vertical amplitude [HIT]
CINEMA mode
Vertical amplitude [HIT]
PAL WG Philips Pattern, User Adjustment Standard
Adjust the vertical amplitude by [HIT] so that the top-and-bot-
tom flags will be hidden.
PAL Philips Pattern, User Adjustment Standard
Adjust the vertical position [VPS1] so that the vertical screen
position will come to the center in Philips Pattern. (See the
figure on the right)
PAL Philips Pattern, User Adjustment Standard
Adjust the vertical amplitude position by [HIT] so that the top
and bottom of the circle will contact the CPT mask in Philips
Pattern. (See the figure on the right)
Philips Pattern, User Adjustment Standard
Adjust the vertical amplitude by [HIT] so that point shown in
the lower right will contact the CRT mask. (See the figure on
the right)
Adjusting items Adjusting methods
Contact point at
WIDE mode
Contact point at
Super-live
mode
Black
Yellow Red Yellow
Contact point at
CINEMA mode
1. Data adjustment
To Next Page
Loading...
