420 Series 3-57
(c) Extended
Displays the amount of extended memory the computer has available. You
cannot change this value.
(d) Shadow BIOS ROM
Displays 192 KB of RAM, which is reserved for the Shadow BIOS ROM.
The value cannot be changed.
2. Display
This option configures the computer’s display.
(a) Display Adapter
Displays the internal controller for the VGA internal display. Only VGA
compatible is displayed. You cannot change it.
(b) LCD Display Mode
The LCD displays text in 80 characters by 25 lines and graphics in 800 by
600 pixels for either Color or Monochrome mode. Use this option to set the
computer’s display mode to Color or Monochrome.
Color Selects color mode. (Default)
Monochrome Selects monochrome mode. Some software is
displayed better in monochrome mode.
(c) VGA Segment Address
Use this option to set the VGA segment address from the following option:
C000H, E000H (Default), E400H
NOTE: In the DOS environment, if you choose either E400H or
C000H, the Pop-up window is not displayed when you press the Fn+F2
or Fn+F3 hotkeys. However, the corresponding functions of the keys
work.
To Next Page
Loading...
