420 Series 3-59
3. Hard Disk
Use this item to select the hard disk mode.
Enhanced IDE Select this mode when using MS-DOS,
(Normal) Windows or OS/2. (Default)
Standard IDE Select this mode when using Novell NetWare or
UNIX. When this mode is selected, up to 504MB is
logically available even though the disk’s capacity is
larger than 504MB.
To see the capacity of the hard disk, use the CHKDSK command. See your DOS
documentation for details on using CHKDSK.
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if
you change the setting, you will have to reformat the hard disk for the
appropriate setting.
To Next Page
Loading...
