3-66 420 Series
(g) Panel Power On/Off
Allows you to automatically turn your computer on or off by opening or
closing the display panel. If this feature is enabled when the computer is in
Resume mode, the system is automatically powered off when the display
panel is closed and powered on when the panel is opened. This option does
not appear when the computer is in boot mode.
Enabled Enables the feature.
Disabled Disables the feature. (Default)
NOTE: Do not remove the AC cable and battery pack at the same time
when you use this feature. If you do so, data saved by AutoResume will
be lost. You must also reset this option.
(h) Alarm Power On
This option lets you set the time for the system to turn on automatically. For
example, if you are expecting to receive a modem transmission at a time
when you are away or asleep, you can set this option to the time of the
transmission. This option does not automatically turn off the system. This
feature operates in either Resume or boot mode.
00:00:00 Sets the power on time (24-hour clock).
Disabled Disables the alarm.
NOTE: Do not remove the AC cable and battery pack at the same time
when you use this feature. If you do so, the setting will be lost. You
must reset this option when you restore power.
(i) Keyboard
Lets you change the keyboard layout and set the Fn key equivalent when you
are using an external keyboard. Selecting this option displays the following
subwindow.
Keyboard
Int. Keyboard key layout = Normal
Ext. Keyboard "FN" key equivalent = Disabled
To Next Page
Loading...
