4-20 420 Series
4.8 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figures 4-18 to 4-20.
1. Turn off the power to the computer. Disconnect the AC power cord and all
external cables connected to the computer.
2. Remove the battery pack, optional PC card, optional memory module, FDD or
CD-ROM drive, and HDD as described in Sections 4.2 through 4.7.
3. Release 14 latches on the base cover and remove it. Begin along the front side.
Figure 4-18 Removing the keyboard base
4. Lift out the keyboard and set it on the wrist rest.
To Next Page
Loading...
