(17/18)
4.3. To write data form USB to TV
(1) Press “OK” on “Start USB Clone” button of “USB Clone Function”, USB Clone mode initial window
[2-1] is displayed.
(2) Insert USB memory, select USB to TV [2-1], and press [OK] key.
(3) The window [2-3] will be displayed.
(4) When the copying has finished successfully, the message "The TV will reboot when this window is
closed." will be displayed. If the copying is not successful, an error message will be displayed.
(5) Exit the menu and the TV will reboot.
(6) Remove the USB memory.
To Next Page
Loading...
