Page 2 of 2
Figure 3 Figure 4
6) The software upgrade is complete when the TV receiver displays “The software upgrade is complete! …”
window similar to what is shown in Figure 4.
7) Remove the USB Flash Drive from the USB port. The TV receiver will cycle off and then return to the on
condition.
8) Adjust any personal preferences as noted prior to the software upgrade.
9) The software upgrade procedure is completed.
(After completing the software update the USB drive used for this update should be formatted prior to using with any
other application. Use a PC to format the USB drive prior to using the USB drive with any other application)
TOSHIBA AMERICA INFORMATION SYSTEMS INC
1420-B Toshiba Dr.
Lebanon, TN 37087
www7.toshiba.com
2011 Toshiba America Information Systems Inc. Installation Instructions INST2011-015.pdf
To Previous Page
Loading...
