29
Connecting Your TV
HDMI® CEC connection
VIDEO AUDIO
L R
R
L
OUT
IN
DVI /HDCP
OUT
IN
(Sample Illustration) 32/40/50L2400U—DVI connections
To ensure that the HDMI
®
or DVI device is reset properly:
v When turning on your electronic components, turn on the TV
first, and then the HDMI
®
or DVI device.
v When turning off your electronic components, turn off the
HDMI
®
or DVI device first, and then the TV.
EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of high-
definition video signals. Because this is an evolving technology, it is
possible that some devices may not operate properly with the TV.
HDMI
®
CEC connection
You can control the basic functions of connected audio/video
devices using the TV’s remote control if you connect a HDMI
®
CEC
compatible audio receiver or playback device. The HDMI
®
CEC
Control feature uses CEC technology as regulated by the HDMI
®
standard.
To Next Page
Loading...
Need help?
General