Toshiba 58L5400UC - User Manual

To Next Page

Your TV comes with:

• Remote control and batteries.

• Several documents, including the Resource

Guide, and Standard Limited Warranty

(L5400U only).

• Pedestal stand and hardware.

• All other cables and adapters are sold separately.

• If any items are missing or damaged, notify

your dealer immediately.

• For the United States, the Standard Limited

Warranty is located at

support.toshiba.com/warranty.

• For Canada, the terms and conditions of

the Limited One (1) Year Warranty on Parts and

Labour can be found at

www.toshiba.ca/support Click on Televisions,

Select Warranty, then Select Standard Warranty

& Service Plans and Select Flat Panel

Television (bilingual).

The Resource Guide contains important safety precautions not included in this

document. Please review completely prior to using this product. Complete

instructions are contained in the User's Guide located on Toshiba's web site at :

For United States: support.toshiba.com

For Canada: www.toshiba.ca/support/ceg

Enhance your ownership experience by taking a few minutes to register your Toshiba product at register.toshiba.com (for L5400U

series) or support.toshiba.ca/warranty/ (for L5400UC series). Completing product registration allows Toshiba to provide you with

product information updates, special offers and promotions. Failure to complete product registration will not diminish your rights

under the Standard Limited Warranty.

Pedestal Assembly Instructions

To prevent possible electric shock, protect the power

cord from being pinched when attaching the pedestal

stand.

Before beginning pedestal assembly, carefully lay the

front of the LCD Panel face down on a flat, cushioned

surface such as a quilt or blanket. Leave the bottom of the

unit protruding over the edge of the surface and assemble

pedestal as indicated below.

Two people are required for installation to avoid injury or

damage to the TV.

Extreme care should always be used when attaching the

pedestal stand to avoid damage to the LCD panel.

For safety information, please review the User’s Guide online:

For United States: support.toshiba.com

For Canada: www.toshiba.ca/support/ceg

QUICK START

Check the components

Unpack the box

1. Remove the components and TV from

the box. Save the packing materials in

case you need them later.

2. Remove the documentation for

important information.

A High-Definition signal is needed to receive a High-Definition picture.

Once you have a High-Definition signal you need to connect it to a

High-Definition input on your TV. Not all channels are currently

broadcasting in HD. Standard analog TV channels and HD channels, even

on the same network, broadcast on different channels. (Example: ABC

analog may be on channel 4, while ABC-HD may be on channel 104.)

To display your TV using a Wall Bracket:

If you decide to wall mount your LED TV, always use a wall bracket

Listed by an independent laboratory (such as UL, CSA, ETL) that is

appropriate for the size and weight of the TV:

VESA Mounting Pattern

TV Size Hole Pattern (H x V) Screw Size

58" 400mm x 400mm M6

65" 400mm x 400mm M6

L5400U/UC Series

To display your TV on the included Pedestal Stand:

Observe the following safety precautions:

1. Read and follow the pedestal assembly instructions section in this document.

Before beginning pedestal assembly, carefully lay the TV facedown on a

flat, cushioned surface such as a quilt or blanket. Leave the bottom of the

unit protruding over the edge of the surface and assemble the pedestal as

indicated below.

Extreme care should always be used when attaching or removing the pedestal

stand to avoid damage to the display panel.

2. Assemble the pedestal stand with the hardware provided.

3. After assembling the pedestal, place the TV on a sturdy, level surface that can

support the entire bottom surface of the stand and the weight of the unit.

4. Be sure to secure the TV to a wall stud, pillar, surface, or other immovable structure.

Choosing a location for your LED TV

58/65L5400U (United States model)

58/65L5400UC (Canada model)

Many questions regarding parts, service, and warranties can be answered by visiting the Customer Support Section

of our website:

THANK YOU

If you are experiencing a technical problem or have questions regarding operation, authorized service centers,

warranty or parts, please contact our Customer Support Center at:

Always place the TV on a sturdy, level, stable surface that can support

the entire bottom surface of the stand and the weight of the unit using

the following method:

Secure the TV with a sturdy strap to a wall stud, pillar, or other

immovable structure.

When connecting the strap:

- attach the strap to the TV using the hooks or clips on the back of

the TV.

- make sure the strap is tight, secure, and parallel to the floor.

For L5400U series (United States model):

(800) 631-3811 From Inside the United States

(949) 583-3050 From Outside the United States

For L5400UC series (Canada model):

1-800-268-3404 From within Canada

L5400U series: support.toshiba.com

L5400UC series: www.toshiba.ca/support/ceg

Get detailed product information:

L5400U series: A comprehensive User's Guide for your model

is available at support.toshiba.com, as well as up-to-date

product information.

L5400UC series: For up-to-date product information,

visit www.toshiba.ca/support/ceg.

For detailed product specifications, Select Product, then

select Model and select Model Number.

58” TV

Hook Sturdy strap

(as short as possible)Two stand screws

(Sample illustration)

VESA Mounting Pattern

• Subject to Change.

Product specifications, configurations, prices,

system/component/options availability are all

subject to change without notice.

Notice

58/65L5400U/UC model

58”

65”

58/65L5400U/UC

LEFT x 1

58/65L5400U/UC

RIGHT x 1

58”

65”

58/65L5400U/UC

x 4

M5 ; L10mm

x 4

58L5400U/UC

x 6

65L5400U/UC

M4 ; L8mm

x 1

58/65L5400U/UC

58”

65”

VESA Mounting Pattern

Hook Sturdy strap

(as short as possible)

Two stand screws

(Sample illustration)

65” TV

Two people are required for installation.

1. Unplug and remove any cables and/or other component connectors

from the rear of the TV.

2. Always use the screws supplied or recommended by the wall mount

manufacturer.

3. Follow the instructions provided with your wall bracket. Before

proceeding, make sure the appropriate bracket(s) are attached to the

wall and the back of the TV as described in the instructions provided

with the wall bracket.

4. After attaching the appropriate bracket(s) to the wall and the back of

the TV, remove the pedestal stand from the TV, as described in this

instruction document.

Need help?

Do you have a question about the Toshiba 58L5400UC and is the answer not in the manual?

This document describes the Toshiba L5400U/UC Series LED TV, a high-definition television designed for both United States (L5400U) and Canada (L5400UC) markets. It provides quick start instructions for unpacking, component verification, setup, and troubleshooting.

Function Description:

The Toshiba L5400U/UC Series LED TV is a high-definition television capable of displaying HD content. It supports various input sources for receiving HDTV signals, including over-the-air antennas, cable/phone company HDTV services, and satellite services. The TV can be displayed on an included pedestal stand or mounted on a wall using a compatible bracket. Its primary function is to provide a visual and audio entertainment experience with high-definition clarity.

Important Technical Specifications:

Models: 58/65L5400U (United States), 58/65L5400UC (Canada).
Display Type: LED TV.
High-Definition Support: Requires a High-Definition signal and connection to an HD input for HD picture.
Input/Output Ports (Back Panel):
- DIGITAL AUDIO OUT (optical)
- LAN (Ethernet)
- COLORSTREAM™ HD / VIDEO IN (Component Video with L/R Audio, and Composite Video with L/R Audio)
- 2 HDMI® IN (HDMI inputs)
- ANTENNA / CABLE (RF input)
Input/Output Ports (Left Side):
- USB port
VESA Mounting Patterns:
- 58" TV: 400mm x 400mm (H x V), M6 screw size.
- 65" TV: 400mm x 400mm (H x V), M6 screw size.
Power: Power cord connection.
Remote Control: Included for navigating menus and controlling TV functions.

Usage Features:

Initial Setup:
- Language Selection: Users must select a menu language.
- Time Zone: Selection of the appropriate time zone.
- Store / Home Mode: Option to choose between "Store" mode (for showroom display) and "Home" mode (recommended for normal use).
- ANT/CABLE Input Selection: Choose between "Antenna" or "Cable" for signal reception.
- Channel Scan: Initiates scanning for available channels. Network setup instructions are referenced in the User's Guide.
Receiving HDTV Signals:
- Over-the-Air (Antenna): Connects a high-quality outside antenna directly to the antenna input. Reception depends on proximity to the local signal.
- Cable or Phone Company HDTV Service: Requires subscription to High-Definition service from a local provider.
- Satellite: Requires a High-Definition satellite receiver and appropriate dish hardware, with additional subscription costs.
Connecting to High-Definition Input:
- Antenna Input: For antenna or basic cable, connect directly to the ANTENNA / CABLE input.
- HDMI® to HDMI®: The best digital connection for both video and audio.
- DVI to HDMI®: For HD cable boxes or satellite receivers with DVI output. Requires an HDMI® cable and an HDMI® to DVI converter. Carries digital video only.
- Component Video Input (ColorStream™ HD): Used if HDMI® or DVI is unavailable. Uses three color-coded jacks (red-green-blue) for video and separate analog audio connections (red and white).
Navigating the Menu System:
- Access: Press the MENU button on the remote control.
- Navigation: Use arrow buttons (▲▼◄►) to move within menus.
- Selection/Save: Press OK to save settings or select items. Highlighted items appear in a different color.
- Auto-Close: Menus close automatically after 30 seconds of inactivity.
- Instant Close: Press EXIT to close a menu immediately.
Pedestal Assembly: The TV comes with a pedestal stand and hardware. Assembly involves attaching left and right stand components to the TV base using screws.
- Safety Precautions: Lay the TV face down on a cushioned surface. Ensure the power cord is not pinched. Two people are required for installation to avoid injury or damage.
Wall Mounting: If wall mounting, use a UL, CSA, or ETL listed wall bracket appropriate for the TV's size and weight.
- Procedure: Unplug and remove cables, use manufacturer-supplied screws, follow bracket instructions, and remove the pedestal stand after mounting. Two people are required for installation.

Maintenance Features:

Packing Materials: Users are advised to save packing materials for future use (e.g., if the TV needs to be moved or returned).
Documentation: The Resource Guide contains important safety precautions. A comprehensive User's Guide is available online for detailed instructions and product information.
Warranty: The L5400U series includes a Standard Limited Warranty (details at support.toshiba.com/warranty). The L5400UC series has a Limited One (1) Year Warranty on Parts and Labour (details at www.toshiba.ca/support/ceg).
Product Registration: Users are encouraged to register their Toshiba product at register.toshiba.com (L5400U) or support.toshiba.ca/warranty/ (L5400UC) to receive product updates, offers, and promotions.
Troubleshooting/Support:
- Before Returning to Store: Users are advised to contact Customer Support for technical problems, operation questions, authorized service centers, warranty, or parts.
- Customer Support Center:
  - L5400U (US): (800) 631-3811 (inside US), (949) 583-3050 (outside US).
  - L5400UC (Canada): 1-800-268-3404 (within Canada).
- Online Resources: Toshiba's support websites (support.toshiba.com for L5400U, www.toshiba.ca/support/ceg for L5400UC) offer electronic User's Guides and FAQs.