102
Learning the Basics
Using the CD-RW/DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
6 Place the disc carefully in the disc tray, label side up.
Sample positioning the disc in the drive
7 Gently press the disc onto the center spindle until it clicks
into place.
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
8 Make sure the disc is completely on the spindle and is
lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact Toshiba support for assistance.
9 Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
To Next Page
Loading...
