106
Learning the Basics
Using the CD-RW/DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
2 Pull the tray out until it is fully open, remove the disc,
and place it in its protective cover.
3 Gently push the tray in to close it.
Removing a disc with the computer off
1 Insert a slender object, such as a straightened paper clip, into
the manual eject hole.
The disc tray slides partially out of the drive (about 1
inch).
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
2 Pull the tray out until it is fully open, remove the disc,
and place it in its protective cover.
3 Gently push the tray in to close it.
Caring for CD or DVD Discs
❖ Store your discs in their original containers to protect
them from scratches and keep them clean.
❖ Do not bend a disc or place heavy objects on top of it.
❖ Do not apply a label to or otherwise mar the surface of a
disc.
❖ Hold a disc by its outside edge. Fingerprints on the
surface can prevent the CD-RW/DVD-ROM or multi-
function drive from reading the data properly.
To Next Page
Loading...
