User’s Manual A-2
Specifications
Power Requirements
Built-in Modem
The ability of this feature is depending on the model you purchased.
AC adaptor 100- 240 volts AC
50 or 60 hertz (cycles per second)
Computer 15 VDC
5.0 amperes/6.0 amperes
Network control unit (NCU)
Type of NCU AA
Type of line Telephone line (analog only)
Type of dialing Pulse
Tone
Control command AT commands
EIA-578 commands
Monitor function Computer’s speaker
Communication specifications
Communication
system
Data: Full duplex
Fax: Half duplex
Communication
protocol
Data
ITU-T-Rec V.21/V.22/V.22bis/V.32
(Former CCITT) /V.32bis/V.34/V.90
Bell 103/212A
Fax
ITU-T-Rec V.17/V.29/V.27ter
(Former CCITT) /V.21 ch2
To Next Page
Loading...
