31
Getting Started
Connecting to a power source
To connect AC power to the device:
1 Connect the power cord/cable to the AC adaptor.
(Sample Illustration) Connecting the power cord/cable to the AC
adaptor
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
2 Plug the AC adaptor cord into the DC-IN on the bottom of the
device.
(Sample Illustration) Connecting the AC adaptor cord to the device
3 Connect the power cord/cable to a live electrical outlet.
The Power light on the indicator panel glows white.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
The device’s battery light gives you an indication of the
battery’s current charge:
❖ Glows amber while the battery is being charged
(AC adaptor connected)
❖ Glows white when the battery is fully charged
+
To Next Page
Loading...
