33
Getting Started
Changing the battery
Changing the battery
When your battery has run out of power, you have two options: plug
in the AC adaptor or install a charged battery.
Never short-circuit the battery pack by either accidentally or
intentionally bringing the battery terminals in contact with another
conductive object.
❖ Never expose a battery pack to abnormal shock, vibration or
pressure.
Failure to observe the foregoing could result in serious injury.
Removing the battery from the device
To remove the battery:
Remove the SD™ Card from the SD™ Card slot. The SD™ Card slot
must be empty when removing the battery from the device.
1 Turn the tablet’s power off and remove all cables and
peripherals that are connected to the device.
2 Turn the tablet upside down and slide the cover lock to the
unlocked position.
(Sample Illustration) Unlocking the back cover lock
3 Slide your finger under the cover recess (speaker area) and first
lift up the corner closest to the lock.
Cover lock
Unlocked
position
To Next Page
Loading...
