Toshiba Canvio AeroCast - Service Provider Contact Information; AC Adapter and Power Source Safety

9
Service Provider
Disconnect device from the electrical outlet and take
device to an authorized Toshiba service provider if:
❖ AC adaptor or power cable/cord are damaged.
❖ Liquid has spilled into device or
an object (such
as
a screw, staple or paper clip) has entere
d
device.
❖ Device has been dropped, subject to shock or
impact and/or damaged in some way.
❖ Noticeable signs of overheating, smoke,
deformation, cracks, leaks or unusual odor occur.
❖ Service is needed on component inside
compartments requiring opening or removal of
covers.
Failure to do so may result in risk of fire, electric shock,
serious bodily injury and/or damage to your device.
❖ Do not plug the AC adaptor into a power source
that does not correspond to the voltage, current
and the frequency specified on the regulator
y
labe
l of the unit. An overload on the socket and/
or AC adaptor may cause a fire or electric shock,
possibly resulting in serious injury.
❖ Always confirm that the power plug (and
extension cable plug if used) has been fully
in
serted into the socket, to ensure a secure
electrical connection. Failure to do so may result
in a fire or electric shock, possibly resulting
in
serious
injury.
❖ Be careful if you use a multiple connector. An
overload on one socket could cause a fire or
electric shock, possibly resulting in serious injury.