After performing the CH PROGRAM function, you can add or erase
specific channels.
I Select the channel you want to erase
using the CHANNEL • or • button, or
select the channel you want to add
using the Channel Number buttons.
2 Press MENU (then • or • on Remote)
repeatedly until "ADD/ERASE" in the
Set up menu is displayed in purple.
TV CAfJLE • TV CAB[ E
CH PRCK_R#J'_
ADD/ERASE :,ADD ERASE
V CHIP CONTROL
[ANGt_AGE PENGLiSH FRANCAiS
ESPANOL
tq4OVE[& ¥] SELECT[< ,]
3 Press • (<) or I_ (>):
To erase the channel
Press the button until "ERASE" is
displayed in purple indicating that the
channel has been erased from the
memory.
iV/CAbLE _[V CASLE
CH PROGRAM
A9D_ERASE ADD, ERASE
V-CHEP CONTROL
LANGUAGE¸ _ENGLISH FRANCAIS
ESPANOL
MOVE[& _/] SELECT[< IP]
To add the channel
Press the button until "ADD" is
displayed in purple indicating that the
channel has been memorized.
TWCABLE: _IV CABLE
CH PRC6RAM
ADD_ERASE:,ADD ERASE
V-CHIP CO_TROi
LANGUAGE¸ ,E_GL_SH FRANCAIE
ESP_NOL
MOVE[A TI SELECT[< _]
4 Repeat steps 1 to 3 for other channels.
You have now completed the channel programming.
9
To Next Page
Loading...
