Toshiba DVR - 5-6.2 HTTP SETUP; 5-6.3 DDNS SETUP

36
5-6.2 HTTP SETUP
To enable IE to connect to the DVR, user is required to enable HTTP server. The
default port for IE is 80.
Table 5-6.4 The options in HTTP setup
Item Description
ENABLE HTTP
SERVER
Check to enable HTTP server. Users can remotely access into the
DVR over the network if the HTTP function is activated.
PORT Enter a valid port value from 1 up to 65000. The default value is 80.
5-6.3 DDNS SETUP
To use DDNS, please enable the DDNS function, and choose the DDNS server that is
used. To apply DDNS, please check appendix II for detail.