Toshiba DVR - 5-7 PTZ & RS485 SETUP

39
5-7 PTZ & RS485 SETUP
The DVR allows users to control PTZ function of your camera. To enable PTZ function, the 485
cable should be connected to the RS-485 port of DVR.
Table 5-7.1 The options in PTZ and RS485 setup
Item Description
ENABLE PTZ
Click the box to enable∕disable PTZ function for each channel.
PROTOCOL
Set up the protocol of PTZ cam. The supported protocol are
PELCO-P, PELCO-D, KND, LI-LIN.
PTZ ID
Click or press ⊳  to set up PTZ ID. The valid ID value is from 1 to
64.
BAUD RATE
Select baud rate for PTZ from 2400、4800、9600